Highlight: | Manual inflatable packers for water wells,Permeability inflatable packers for water wells,Permeability inflatable packers for grouting |
---|
manual inflation packerfor grouting, Inflatable packer for borehole, single packer, double packer
Inflatable packer for grouting
Inflatable seal packer features:
1. All materials of the hole packer are inflaming retarding and antistatic and meet related national standards.
2. The high elasticity and tightness of rubber is utilized, so that the hole packer is applicable to irregular holes and better sealing performance can be realized especially in soft coal seams.
3. The rubber surface is processed by adopting special technologies, so that excess water will be extracted and grout will not flow out.
4. By using the hole packer's characteristics of high resistance to pressure, it may be used to realize high-pressure grouting on coal body, so that the grout can enter the gaps between coal seam and thus ensure the quality of hole sealing.
5. The hole sealing length may be designed at will.
6. It is applicable to all types of coal seams, whether soft or hard.
7. After boring is completed, the hole may be pre-sealed by using water pressure in the mine and then sealed by injecting grout.
8. It is easy to operate and can complete the hole sealing operation at one attempt.
Spec. & Model
mm
|
Length
mm
|
Outside Diameter
mm
|
Applicable Aperture
mm
|
Free-Expansion Outside Diameter
mm
|
Working Pressure
Mpa
|
Burst Pressure
Mpa
|
Proof Pressure
Mpa
|
|
MDT-30/15 | L±5 | 30±1 | 32-37 | 40-50 | 15 | 16 | 8 | |
MDT-38/20 | L±5 | 38±1 | 40-55 | 58-68 | 20 | 16 | 8 | |
MDT-38/6 | L±5 | 38±1 | 40-50 | 60-75 | 6 | 24 | 12 | |
MDT-50/6 | L±5 | 50±1 | 55-70 | 70-85 | 6 | 24 | 12 | |
MDT-55/6 | L±5 | 55±1 | 60-80 | 90-105 | 6 | 20 | 10 | |
MDT-63/5 | L±5 | 63±1.5 | 65-95 | 95-110 | 5 | 16 | 8 | |
MDT-70/4 | L±5 | 70±1.5 | 75-115 | 105-120 | 4 | 16 | 8 | |
MDT-125/6 | L±5 | 125±2 | 130-180 | 200-230 | 6 | 16 | 8 |
Contact Person: Mr. Hank
Tel: +8615974214982